This site can be navigated without Javascript using site links (along top) for main section nav and sidebar links (left side) for subsection nav.

jump to content - Skip all navigation Jump to site navigation Jump to section navigation
noaa nasa logo links to noaa home
 nasa logo links to nasa home dept of commerce nasa logo links to doc home
A collaborative effort between NOAA, NASA, DOC and Industry.
GOES R Program Office Banner
+Home +Overview + Procurement

GOES-R
+ Home
+ GOES-R Overview
Space Architecture
Ground Architecture
Inter-Agency Team
Ground Procurement

Related sites

+ FedBizOpps
+ NASA NAIS

Flight Procurement

For Flight RFP documents, please go to http://www.fedbizopps.gov/ and search on GOES-R or solicitation number NNG08193033R.

Applicable & Reference Documents
Sorted by Document Title

Document Title Document Number Doc Date Download
       
ABI Performance and Operational Requirements Documents (PORD) 417-R-ABIPORD-0017 10/26/2007 ITAR Restricted
AFSPC Memorandum, Joint 45 SW/SE and 30 SW/SE Interim Policy Regarding EWR 127-1 Requirements for System Safety for Flight and Aerospace Ground Equipment Lithium-Ion Batteries EWR 127-1 5/4/2005 This document can be found online -
Link to non U.S. government siteClick here
American National Standard for Use of the International System of Units (SI): The Modern Metric System, December 2002 IEEE/ASTM SI-10  4/1/1997 Copyrighted
Anodic Treatment- Titanium and Titanium Alloys; Solution pH 13 or Higher, SAE International, Warrendale, PA, July 1997 SAE-AMS-2488D 7/1997, Reaffirmed 2006 Copyrighted
ANSI Standard - Earned Value Management Systems ANSI/EIA 748-A   This document can be found online.
AOS Space Data Link Protocol, Blue Book Issue 2, July 2006, Specification, Consultative Committee for Space Data Systems, Recommendation for Space Data System Standards CCSDS 732.0-B-2  7/2/2006 + View document
Avoiding Problems Caused by Spacecraft On-Orbit Internal Charging Effects NASA-HDBK-4002  2/17/1999 + View document
Capacitors, Chip, Fixed, Tantalum, Established Reliability, Style CWR11 (Metric), Rev F.                   MIL-PRF-55365 F 4/16/2004 + View document
Capacitors, Fixed, Ceramic Dielectric (Temperature Stable and General Purpose), High Reliability, General Specification for;  Rev C (sup. 1)                 MIL-PRF 123C1

Rev C and C-1 3/27/2003

+ View document 1

+ View document 2

Capacitors, Fixed, Electrolytic (Solid Electrolyte) Tantalum, (Polarized, sintered slug), Established Reliability, Styles, CSS13 and CSS33 (High Reliability Applications), Rev B (Am1)                 MIL-PRF-39003/10  10/16/2003 + View document
Chemical Conversion Coatings on Aluminum and Aluminum Alloys, Naval Air Warfare Center, Lakehurst, NJ MIL-DTL-5541F  11 July 2006 + View document
Classification for Air Cleanliness ISO 14644-1 1999 Copyrighted
Cleanrooms and associated controlled environments - Part 3: Metrology and test methods, 9/26/02 ISO/DIS 14644-3 9/26/2002 Copyrighted
Contamination Control Requirements,  Revision D SN-C-0005 Rev D July 20,1998 + View document
Contract Performance Report dtd 3/30/2005 DI-MGMT-81466A 03/30/05 + View document
Crimping, Interconnecting Cables, Harnesses, and Wiring, February 9, 1998                 NASA-STD-8739.4 2/1/1998 w/ change 3 + View document
Criteria for Flight Project Critical Milestone Reviews GSFC-STD-1001 Feb-05 + View document
Design of Space Flight Field Programmable Gate Arrays GSFC 500 PG-8700.2.7  8/12/2005 + View document
top of pageTop of Page
Design, Construction, and Testing Requirements for One of a Kind Space Equipment DOD-HDBK-343 09/04/92 for validation 1, 1/2/1986

+ View document 1

+ View document 2

Design, Manufacturing and Quality Standards for Custom Electromagnetic Devices for Space Applications, Rev B(4),  MIL-STD-981  Rev B 1/31/92; Chg 4  6/13/00 + View document
Dissimilar Metals,  Rev. B (VN2)           MIL-STD-889 5/17/1993

+ View document 1

+ View document 2

+ View document 3

DoD Earned Value Management Implementation Guide (EVMIG) EVMIG
6-Oct
 + View document
Engineering Requirements, NASA Software; September 27, 2004 NPR 7150.2 9/27/04 + View document
ESD Association Standard for the Development of an ESD Control Program for Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices), Rev 1999           ANSI/ESD-S20.20-1999 8/4/99 Copyrighted
EXIS Performance and Operational Requirements Documents (PORD) 417-R-EXISPORD-0116 10/31/2007 ITAR Restricted
“Expendable Launch Vehicle Payloads Safety Review Process Standard” NASA-STD-8719.8 6/1/1998 + View document
Farrenkopf, R. L., "Analytic Steady-State Accuracy Solutions for Two Common Spacecraft Attitude Estimators," Journal of Guidance and Control (Reston, VA:  American Institute of Aeronautics and Astronautics), July-August, 1978, Vol. 1, No. 4, pp. 282-284. AIAA_55779_505 + View document
Fiber Optic Terminations, Cable Assemblies, and Installation, February 9, 1998                  NASA-STD-8739.5 2/9/98 - baseline

+ View doc 1

+ View doc 2

Field Programmable Gate Array (FPGA) Development Methodology GSFC 500-PG-8700.2.8 11/13/06 + View document
Fracture Control Requirements for Payloads using the Space Shuttle, NASA NASA-STD-5003 10/7/1996 + View document
General Environmental Verification Standard (GEVS) For GSFC Flight Programs and Projects GSFC-STD-7000 4/1/2005 + View document
General Fracture Control Plan for Payloads Using the Space Transportation System (STS)  GSFC 731-0005-83 11/1/1988 + View document
General Requirements for the Competence of Testing and Calibration Laboratories, Rev. 1999 ISO/IEC-17025 06/29/05 This document can be ordered from NASA Tech Standards System.
General Specification for Assemblies, Moving Mechanical, for Space and Launch Vehicles.  MIL-A-83577B 2/1/98 + View document
Generic Performance Specification for Printed Boards, July 1996                  IPC-6011 7/1/1996 Copyrighted
Generic Standard on Printed Board Design, Rev A, May 2003                IPC-2221A 5/1/2003 Copyrighted
GIDEP Operations Manual S0300-BT-PRO-010 11/1/1994

+ Chapter 1
+ Chapter 2
+ Chapter 3
+ Chapter 4
+ Chapter 5
+ Chapter 6
+ Chapter 7
+ Chapter 8
+ Chapter 9
+ Chapter 10
+ Chapter 11
+ Cover
+ Appendix A
+ Appendix B1
+ Appendix C1
+ Appendix D
+ Appendix E
+ Appendix G

top of pageTop of Page
GLM Performance Operational Requirements Documents (PORD) 417-R-GLMPORD-0057 8/1/2007 ITAR Restricted
Goddard Space Flight Center Fastener Integrity Requirements,         541-PG-8072.1.2  3/5/2001 Rev - + View document
Government-Industry Data Exchange Program Requirements Guide S0300-BU-GYD-01 11/1/1994 + View document
Guideline for the Selection of Near-Earth Thermal Environment Parameters for Spacecraft Design, October 2001 NASA/TM-2001-211221  10/1/2001 + View document
Guidelines and Assessment Procedures for Limiting Orbital Debris     NSS 1740.14 8/1/1995 + View document
Guidelines for Developing Quality Manual ISO 10013 07/15/07 Copyrighted
Guidelines for the Selection of Metallic Materials for Stress Corrosion Cracking Resistance in Sodium Chloride Environments, NASA MSFC, Rev A  MSFC-STD-3029 Rev A  25 February 2005 + View document
Instructions for EEE Parts Selecting Screening, Qualification, and Derating, May 2003                    GSFC EEE-INST-002 May 2003 + View document
Limiting Orbital Debris  NPR 8715.6 8/17/2007 + View document
Markley, F. Landis, and R. G. Reynolds, "Analytic Steady-State Accuracy of a Spacecraft Attitude Estimator," Journal of Guidance, Control, and Dynamics (Reston, VA:  American Institute of Aeronautics and Astronautics), November-December, 2000, Vol. 23, No 6 AIAA-4648-582 Copyrighted
Material Safety Data Sheet OSHA Form 20 or DD Form 1813   Click here to download
Metallic Materials Properties Development and Standardization (MMPDS) DOT/FAA/AR-MMPDS-02 4/1/2005 Copyrighted
Mishap Reporting, Investigating, and Recordkeeping, NASA Procedural Requirements for, February 11, 2004 NPR 8621.1A February 11, 2004  
NASA Contractor Financial Management Reporting NPR 9501.2D 5/23/2001; revalidated 2/16/06 + View document
NASA Cost Estimating Handbook     Click here to download
NASA General Safety Program Requirements NPR 8715.3 Chapter 3 4/4/2007 + View document
NASA Software Assurance Standard NASA-STD-8739.8 7/28/2004 w/ Change 1 + View document
NASA Software Safety Standard, July 8, 2004 NASA-STD-8719.13B with Change 1 7/8/2004 + View document
NASA Space Flight Program and Project Management Requirements NPR 7120.5D 3/6/2007 + View document
NASA Systems Engineering Processes and Requirements NPR 7123.1A 3/26/2007 + View document
Orbital Debris Generation, (NASA Policy for Limiting) NASA Policy Directive NPD 8710.3B;  1/27/2003 + View document
Outgassing Data for Selecting Spacecraft Materials NASA Reference Publication 1124 11/1990 Click here to download
top of pageTop of Page
Payload Test Requirements, Rev A NASA-STD-7002A 9/10/2004 + View document
Payload Vibroacoustic Test Criteria  NASA-STD-7001  6/21/1996 + View document
Preparation of Operations and Maintenance Manuals NOAA/NESDIS S24.801 7/22/2002 + View document
Probabilistic Risk Assessment (PRA) Procedures for NASA Programs and Projects  NPR 8705.5 07/12/04 + View document
Product Verification Requirements for Launch, Upper stage, and Space Vehicles, Rev. D MIL-STD-1540D 1/15/1999 + View document
Qualification and Performance Specification for Flexible Printed Boards, Rev A IPC-6013A 4/1/2006 Copyrighted
Qualification and Performance Specification for Rigid Printed Boards  IPC-6012B  8/1/2004 Copyrighted
Qualification and Quality Requirements for Solar Cells AIAA S-111-2005 9/26/2005 Copyrighted
Qualification and Quality Requirements for Space Solar Panels AIAA S-112-2005 9/26/2005 Copyrighted
Quality Management Systems-Requirements, Rev. 2000             ANSI/ISO/ASQ-Q9001  12/13/2000 Copyrighted
Range Safety Requirements, Air Force Space Command Manual 91-710, July 2004 AFSPCMAN 91-710 see also AFSPCM 91-710 7/1/2004 + View site to download
Recommendations for Advanced Orbiting Systems, Networks and Data Links, Architectural Specification CCSDS 701.0-B-3 6/1/2001 + View document
Reliability Prediction of Electronic Equipment, (Change Notice 2) Rev F February, 1995        MIL-HDBK-217 2/1/1995 + View document
Requirements for Packaging, Handling, and Transportation for Aeronautical and Space Systems, Equipment and Associated Components, March 28, 2005                      NPR 6000.1G 3/28/2005 + View document
Requirements for the control of Electromagnetic Interference Characteristics of Subsystem and Equipment MIL-STD-461E 8/1/1999 - E  + View document
Risk Clarification for NASA Payloads  NPR 8705.4 6/14/2004 + View document
Risk Management Procedural Requirements (Revalidated 2/1/07) NPR 8000.4 2/1/2007 + View document
Sectional Design Standard for Flexible Printed Boards, November 1998 IPC-2223 11/1998 Copyrighted
Sectional Design Standard for Rigid Organic Printed Boards, February 1998 IPC-2222 2/1/1998 Copyrighted
SEISS Performance and Operational Requirements Documents (PORD) 417-R-SEISSPORD-0030 8/21/2007 ITAR Restricted
Society of Allied Weight Engineers (SAWE) Recommended Practice No. 6. [“Standard
Coordinate Systems for Reporting the Mass Properties of Flight Vehicles; Recommended Practice No. 6”, Revised 1 September 1999, Society of Allied Weight Engineers, Los Angeles, 3 January
1995.]		 9/1/1999 + View document
Society of Allied Weight Engineers (SAWE) Recommended Practice (RP) No. 11 sections 5.3.3 and 5.3.4. [“Mass Properties Control for Space Vehicles; Recommended  6/3/2000 + View document
Soldered Electrical Connections, January 18, 2001                NASA-STD-8739.3 12/15/1997 - baseline change 2 dated 1/18/2001 + View document
Space Packet Protocol, Blue Book, Issue 1, September 2003 CCSDS 133.0-B-1  9/1/2003 + View document
Space Wire - Links, Nodes, Routers and Networks, 24 January 2003 European Cooperation for Space Standardization (ECSS) ECSS-E-50-12A  1/24/2003 Copyrighted
Spacecraft Attitude Determination and Control, edited by James R. Wertz (Boston: Reidel, 1978), pp. 268-270. AIA_4648_528   This document can be found online.
top of pageTop of Page
Specification for Destructive Physical Analysis, Rev A.                   GSFC S-311-M70   January 7, 1991 + View document
Specification Practices  MIL-STD-490A 06/04/85

+ View doc 1

+ View doc 2

Standard for Lithium Batteries, Underwriters Laboratories Inc UL 1642 8/9/2007 Copyrighted
Standard General Requirements for Safe Design and Operation of Pressurized Missile and Space Systems  MIL-STD-1522A 9/4/1992 - CN3
5/28/1984 - Rev. A

+ View document

+ View Document 2

Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment, Rev 2007           ASTM E-595-07 12/1/2007 Copyrighted
SUVI Performance and Operational Requirements Documents (PORD) 417-R-SUVIPORD-0111 8/30/2007 ITAR Restricted
TC Space Data Link Protocol, Blue Book Issue, Consultative Committee for Space Data Systems, Recommendation for Space Data   CCSDS 232.0-B-1 9/1/2003 + View document
TC Synchronization and Channel Coding, Blue Book Issue Technical Corrigendum 1; Consultative Committee for Space Data Systems, Recommendation for Space Data System Standards  CCSDS 231.0-B-1 6/1/2006 + View document
Technology Readiness Levels, A White Paper, April 6, 1995, John C. Mankins , Advanced Concepts Office, Office of Space Access and Technology, NASA N/A 4/6/1995 + View document
Test Requirements for Launch, Upper Stage, and Space Vehicles Vol. I: Baselines, Vol. II:  Application Guidelines, Rev A  MIL-HDBK-340A  4/1/1999 + View document
Time Code Formats. Blue Book. Issue 3, January 2002 CCSDS 301.0-B-3  1/1/2002 + View document
Use of the SI (Metric) System of Measurement in NASA Programs, NASA NPD 8010.2E 3/4/2007 + View document
Work Breakdown Structure 2734/1; Contractor Performance Report - Organizational Categories - 2734/2; Contractor Performance Report - Baseline 2734/3; Contractor Performance Report - Staffing 2734/4; Contractor Performance Report - Explanations and Problem Analyses 2734/5; DD Form 2734/1 - DD Form 2734-5   See link in CDRL.
Workmanship Standard for Staking and Conformal Coating of Printed Wiring Boards and Electronic Assemblies      NASA-STD-8739.1 8/6/1999 + View document
Workmanship Standard for Surface Mount Technology, August 31, 1999 NASA-STD-8739.2 8/31/99 + View document

 
top of pageTop of : Page | Content | PageNav | SiteNav

+ Privacy Policy   +Disclaimer   +USA.gov
Contact Us